A security screen is
really very simple. Your existing frame, or one that we manufacture to fit, is
screened with a special alarm mesh which has detection wires interwoven every
four inches. This mesh is almost invisible.
In addition there is a magnetic switch placed in the
frame. This protects the screen from tampering. A plug connector is also added
so it can be tied into your alarm system.
The picture above is an example
of how the components go together. The connector and tamper may be placed almost
anywhere in the frame parameter. The read switches we use are color matched to
the frame. This makes them harder to detect. The two common plug types are used
and come in white or black to suit your trim colors. The mesh may be placed
either vertical (most common) or horizontal. The horizontal wiring is
recommended in wet conditions near the ocean or lake.
We also deal in wood frames.
The metal frame may be recessed into your wood frame for a pleasing flush
appearance or we can wire directly into a wood frame with no metal used.
The metal frames we use all
have a factory applied baked enamel finish. We will not use bare aluminium. An
internal metal corner is also used; no plastic is used here. Custom colors are
not a problem either.
Alarm screens offer the best
protection with the windows open or closed. They are a normal part of a window
and thus do not visually interfere with any window treatment or decor. They will
not hamper your movement within the home or office when the system is armed,
unlike motion detectors. If the screen is cut or tampered with the system is
instantly activated.
Security screens provide the
best of everything, fresh air, visual appearance, ease of maintenance and
protection.
